Hardware processing usually carries out different steps of processing according to different processing needs of customers, and then arranges processing. The following editor will talk about the processing methods of small hardware processing.

Usually hardware processing manufacturers refer to the arrangement of blanking parts on the sheet or strip as layout. There are many ways to lay out stamping parts, but the selection of the layout form is related to the shape of the stamping parts. The following is a brief introduction to the punching and layout forms of stamping parts of different shapes.

1. Stamping parts with simple geometric shapes such as square tables and rectangular circles should be arranged in straight rows;

2. For T-shaped, L-shaped, S-shaped, cross-shaped and 㮋circular stamping parts, oblique rows are selected;

3. For more than two kinds of stamping parts that are used in both material and thickness, use mixed rows;

4. For small-sized round, hexagonal, square, and rectangular stamping parts in mass production, multiple rows are used;

5. Mass production of small and medium narrow stamping parts such as watch hands and similar stamping parts or continuous drawing of strip materials, using blanking edges.

According to the classification of processing steps of different shapes above, hardware processing manufacturers first need to consider the product quality required by customers themselves, and we will definitely meet customers' requirements in all aspects.